Email Image
Email : info@24vc.com
IP Icon
YOUR IP: 18.97.9.171

Windows 8 Step by Step Guide for L2TP VPN
 

Step 1:


Right click on the network icon in the system tray and click Open Network and Sharing Center.
Right click on the network icon in the system tray and click Open Network and Sharing Center.
 

Step 2:


Click Set up a new connection or network.
Click Set up a new connection or network.
 

Step 3:


Select Connect to a workplace and then click next.
Select Connect to a workplace and then click next.
 

Step 4:


Select Use my Internet connection (VPN).
Select Use my Internet connection (VPN).
 

Step 5:


Enter the Host Name we provided you in the activation email as the Internet address and for Destination name simply put 24vc. Click Create.
Enter the Host Name we provided you in the activation email as the Internet address and for Destination name simply put 24vc. Click Create.
 

Step 6:


Right click on the network icon in the system tray and click Open Network and Sharing Center. In Network and Sharing Center, click on Change Adapter Settings
Right click on the network icon in the system tray and click Open Network and Sharing Center. In Network and Sharing Center, click on Change Adapter Settings
 

Step 7:


Right Click on 24vc and click on Properties.
Right Click on 24vc and click on Properties.
 

Step 8:


Go to the Security tab.
Go to the Security tab.
 

Step 9:


For Type of VPN select Layer 2 Tunneling Protocol (L2TP/IPSec).
For Type of VPN select Layer 2 Tunnelling Protocol (L2TP/IPSec).
 

Step 10:


Click Advanced Settings.
Click Advanced Settings.
 

Step 11:


Check Use Pre-shared key for authentication and enter 12345678 as the Key. Click OK.
Check Use Pre-shared key for authentication and enter 12345678 as the Key. Click OK.
 

Step 12:


Go to Networking tab.
Go to Networking tab.
 

Step 13:


Uncheck Internet Protocol Version 6 and File and Printer Sharing. Then click OK.
Uncheck Internet Protocol Version 6 and File and Printer Sharing. Then click OK.
 

Step 14:


Click on the network icon in the system tray and click on the newly created 24vc VPN connection.
Click on the network icon in the system tray and click on the newly created 24vc VPN connection.
 

Step 15:


Simply enter the username and password provided in the activation email. Click Connect.
Simply enter the username and password provided in the activation email. Click Connect.
 
Optional Step:

In this tutorial we will teach you how to easily block the internet traffic of a specific program, in the event that your VPN connection drops for any reason at all. We will do so by using the built in Windows 7 firewall service (which is also available on Windows 8 & 10), thus eliminating the need for any additional third party software.

Following this tutorial will provide you with an extra layer of protection for your stealth accounts in case your VPN connection ever drops. For example you can have it setup so that if your VPN connection ever drops, Firefox would no longer be able to load any websites until the VPN was successfully reconnected. Thus preventing any chance of your real ip address leaking, and in doing so protecting your amazon, ebay, or paypal stealth accounts from being linked and suspended.

The Full Step by Step Tutorial is now available below:

How to Block non-VPN Traffic with Windows Firewall